Publicidad
Idiomas disponibles
Idiomas disponibles
ADULT INSTALLATION REQUIRED.
TOOLS REQUIRED:
Level
Measuring tape
Power drill with 3/16" masonry bit
Power screwdriver with bull nose phillips bit
•
READ ALL INSTRUCTIONS BEFORE ASSEMBLY OF DIAPER CHANGING STATION.
•
Unpack carton and identify all parts.
•
This changer has six (6) recess mounting holes.
•
The diaper changing station is no stronger than the anchors or walls to which they are attached and, therefore,
MUST be firmly secured in order to support the weight they are intended to support. Contact an architect or building
contractor if any questions.
Parts Description
Hardware for recessed installation:
2" x 1/4" Wood Screws
Door / Wall Plate
2" x 1/4" Wood Screws
19 1/8"
486 mm
INSTALLATION INSTRUCTIONS
WARNING
PARTS LIST
35-1/8"
(892 mm)
Door / wall plate to be
mounted on outside of
A.D.A. Compliance:
21 1/2"
(546 mm)
1
restroom door.
4.4.1
Maximum Protruding Objects
4.2.5
Forward Reach
4.2.6
Parallel Approach
4.27.4 Operation
Compliant when properly installed.
Quantity
6
1
Publicidad
