PREPARING TO CLIMB
Install Rope
F. With the RIGHT side of the Akimbo facing you, insert
the rope coming from the anchor past the Upper
Bollard, followed by the Lower Bollard, as shown by
the rope path below. The rope must fit snugly
between both the Upper and Lower Cam and Bollard.
G. If rope diameter prevents installation at the highest
friction setting on either the Upper or Lower Bollard,
follow the steps on the previous page to reduce the
friction setting. Continue reducing the friction settings
independently until the rope fits snugly between the
Upper and Lower Cam and Bollard.
F.
H. Once the rope is installed, close the Akimbo as shown
in fig. H.
G.
Do not climb on the Akimbo until the steps on
the following pages are completed! Further
adjustments of the friction settings are likely
necessary.
H.
Ok!
Akimbo User Instructions
11