Intellinet GIGABIT SATA NAS Guía De Instalación Rápida página 2

Gigabit SATA NAS • Quick Install Guide
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS
Model 505895. This guide presents the basic steps to set up and operate this device.
For detailed instructions and specifications, refer to the user manual on the CD
enclosed with this product or at www.intellinet-network.com.
INSTALLATION
Front Panel
1 Power switch — Press on or off; it lights blue
when on. NOTE: It takes about a minute for
the system to boot once the unit is on.
2
LED status indicators — The OS (operating
system) LED lights green when the system
is on/ready; blinks when the system is
starting or is shutting down; and remains off
when the system has shut down. The HDD (activity) LED lights amber to indicate an
error (disk not found or a RAID error); blinks to indicate data access; and remains off
when there is no disk activity.
3 USB backup button — Press/hold in for 4 seconds to back up your files.
4
USB device port — This USB type-A port is for connection to an external USB hard
drive, USB flash drive or USB printer.
Rear Panel
5 Security lock slot — Lock is not included.
6
Ventilation fan — Refer to the user manual.
7
Gigabit Ethernet port — This jack features
multiple LEDs. When lighted green, the left
LED indicates a link. The right LED flashes
green to indicate activity at 10 Mbps; both
green and orange at 100 Mbps; and orange
at 1000 Mbps.
8
Reset button — When the network drive is powered up and ready, press and release
for a software reset; or press and hold it for 5 seconds before releasing to reset all
network drive settings to factory defaults (which will erase all user accounts and
groups).
9
Restart button — Press and release for a hardware reset of the network drive. The
device will restart after you release the button.
10
USB device port — This second USB type-A port is also for connection to an external
USB hard drive, USB flash drive or USB printer.
11
Power adapter jack — For external USB devices, it' s recommended that the USB drives
have their own power supply. If two bus-powered USB .drives are connected at the
same time, at least one of them needs to be powered by an external power supply.
2
ENGLISH
Gigabit SATA NAS,
™
1
2
3
4
5
6
8 9
7
English
10
11