El-Skyport Eco Features; Status Led - Elinchrom EL-Skyport Eco 19349 Instrucciones Para El Uso

SET Config Mode:
(to configure included features only with MAC°/ PC° EL-Skyport Software V. 3.0)
-­Switch­the­module­OFF­//­remove­battery..
-­Hold­the­Test­button­down­whilst­you­insert­the­battery..
-­Keep­test­push­button­pressed­until­STATUS­LED­is­ON.
­Please­check­also­EL-Skyport­PC/MAC­software­3.0­for­changing­Transmitter­setting.

EL-Skyport Eco Features

Power save mode timer:
-­After­not­using­the­Transmitter­for­30­minutes­the­Power­Save­mode­is­active.­To­reactivate­the
­­Transmitter,­press­the­TEST­push­button.
-­The­Power­Save­mode­timer­can­be­configured­with­the­EL-Skyport­PC/MAC­software­v3.0­and­higher.

Status LED:

-­LED­flashes­every­4­seconds­one­time­in­"Standard"­mode­and­two­times­in­"Speed"­mode.
-­LED­intensity­correspond­to­the­battery­status­-­if­off­or­very­low­=>exchange­the­battery.
-­LED­is­OFF­if­the­Transmitter­battery­is­discharged­or­in­"Power­Save"­mode.
.
Reset to manufacturer default setting:
-­Switch­the­module­ON­//­insert­battery.
-­Press­test­button­for­min­10­seconds.
Note:
"GROUP"­settings­are­not­available­for­the­EL-Skyport­ECO­Transmitter.
18