Cn50 And Cn51 Vehicle Power Adapter (Ae36); Important Safety Instructions - Intercom AE36 Instrucciones

CN50 and CN51 Vehicle Power Adapter (AE36)

Instructions

IMPORTANT SAFETY INSTRUCTIONS

1 SAVE THESE INSTRUCTIONS. This manual contains
2 Before using the power adapter, read all instructions and
3 CAUTION: To reduce risk of injury, use with only Intermec
4 Do not expose power adapter to rain, moisture, or snow.
5 Use of an attachment not recommended or sold by Intermec
6 To reduce risk of damage to power adapter connector and
7 Make sure that cord is located so that it will not be stepped
8 Do not operate the power adapter with a damaged cord or
9 Do not operate power adapter if it has received a sharp blow,
10 Do not disassemble power adapter; take it to a qualified
11 To reduce risk of electric shock, unplug power adapter before
12 Internal voltage regulation within the CN50/CN51 limits the
4
important safety and operating instructions for the Model
AE36 vehicle power adapter.
cautionary markings on the power adapter, the battery, and
the product using the battery.
CN50 (Model CN50) or CN51 (Models 1015CP01,
1015CP01S, 1015CP01U). Use of this product with other
devices may cause injury to persons and damage.
may result in a risk of fire, electric shock, or injury to persons.
cord, pull by power adapter connector rather than cord when
disconnecting power adapter.
on, tripped over, or otherwise subjected to damage or stress.
power adapter connector - replace it immediately.
been dropped or otherwise damaged in any way; take it to a
qualified service person.
service person when service or repair is required. Incorrect
reassembly may result in a risk of electric shock or fire.
attempting any maintenance or cleaning.
voltage supplied to charge the Model AB24, AB25, or
1015AB01 battery. Do not charge batteries in a modified or
damaged CN50 or CN51, doing so may result in risk of
battery explosion or fire.