Cleaning And Storage - Hkoenig MX15 Manual De Utilización

Caution:
Over-filled can block the operation, please turn off the unit
and do not connect the plug, take out some of material, then
operating.
Do not use unit continuous more than 1 minute

CLEANING AND STORAGE

1. In addition to this, you must refer to the security
precautions.
2. Do not clean Motor main body, power cord and
plug with water.
3. Clean the engine base with a soft, wet piece of
cloth and some mild cleaning agent.
4. Fill the jug half-full with hot water and a little
cleaning agent. Let the unit run on speed 2 until
the jug is clean.
5. The base with the blades can be taken apart.
Screw of the base counter-clockwise. Take out
the blades together with sealing ring facing
upwards.
6. Now clean jug, lid, closure, base and blades
with sealing ring with hot water and some
cleaning agent. Dry well before re-using.
Caution! The blades inside of the jug are very
sharp.
7. Never use aggressive cleaning agents.