Before You Begin; Tools Needed; Component List - BOERBOEL 73028117 Instrucciones De Instalación

WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the gate or individual.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store, for assistance or replacement parts call: 1-800-336-2383.
FOR INSTALLATION AROUND POOL:
• Must be used with a pool code approved latch, self-closing hinges and installed at required height
specified per local building codes. Always refer to all local building codes prior to use.

BEFORE YOU BEGIN:

When installing a gate on a fence, please note that vinyl gate
posts require an internal support system for weight-bearing
purposes and therefore wooden inserts or a post stiffener is
required. Post stiffener needs to be purchased separately.
When installing a gate on a railing system, please note that the
post is structural and can withstand the weight of the gate.
Always consult your local building code department for
applicable regulations and product acceptance.

Component List:

QTY Description
2 Standard Hinges
2 Hinge Covers
1 Allen Wrench
10 1 ⁄ " Square/Phillips Combo Pan Head Screws
1
4
8 1 ⁄ " Square/Phillips Combo Flat Head Screws
1
4
1¼" Square/Phillips Combo
Pan Head Screws
1¼" Square/Phillips
Combo Flat Head Screws
To obtain and review a copy of the warranty please go to: BoerboelGateSystems.com/warranty.
You can also contact 1-800-336-2383 or write to Boerboel Gate Solutions, 7830 Freeway Circle,
2
Middleburg Heights, Ohio 44130 to request a copy of the warranty.

TOOLS NEEDED:

Hinges
Gate
Safety Glasses
Level
Tape Measure
⁄ " Drill Bit
3
32
Square or Phillips Driver Bit
Pencil
Hinge Covers
Allen Wrench