How To Assemble - Desa Powerfast 10401 Instrucciones De Operación

4. Pull (remove) hinge screw from tool
handle.
5. Release magazine assembly and
slide forward from head assembly
(see Figure 4).
The hammer tacker is now completely
apart and ready for cleaning. Also, jams
may be cleared when taken apart. Take
care not to damage the exposed staple
driver.
Magazine Assembly
Compress
Figure 3 - Compress Magazine Assy.
STAPLES
Staple Brand
®
PowerFast
®
Arrow
®
Bostitch
®
Duo-Fast
®
Rapid
®
Senco
®
PowerFast is a registered trademark of DESA IP, LLC. Arrow
Arrow Fastener Company, Inc. Bostitch
Duo-Fast ® is a registered trademark of Duo-Fast Corporation. Rapid
trademark of Isaberg Rapid AB. Senco
113267
Head Assembly
1/4"
P-A11-1/4
36504A
504
TRA704
A11 04C
A11 1/4
H04
®
is a registered trademark of Stanley-Bostitch, Inc.
® is a registered trademark of Senco Products, Inc.

HOW TO ASSEMBLE

Reverse the above procedure. Align the
staple driver with the channel opening
at the head of the magazine assembly.
Compress magazine assembly slightly
to align holes for the hinge screw and
insert screw.
Note: The hinge screw may be inserted
from either side of handle.
Fasten nut onto hinge screw securely.
Pull
Figure 4 - Removing Magazine Assy.
Staple Sizes
5/16"
P-A11-5/16
36505A
505
TRA705
A11 05C
A11 5/16
H05
®
is a registered trademark of
3
Magazine Assembly
3/8"
P-A11-3/8
36506A
506
TRA706
A11 06C
A11 3/8
H06
® is a registered
www.desatech.com