Bondioli & Pavesi SFT Manual Del Usuario página 17

RATED POWER Pn and RATED TORQUE Mn
kW
S1
13
S2
21
S4 28
S5 37
S6
40
H7
51
S8 66
H8 66
S9
81
SH
97
S0 124
SK 180
INSTALLATION
Always wear adequate safety equipment when performing any maintenance
16
or repair work.
The tractor symbol on the shield indicates the tractor end of the driveline.
17
Torque limiters or overrunning clutches must be mounted at the implement
end.
18 Ensure that the driveline is securely attached to the tractor and the imple-
ment before operating.
Check that all bolts or nuts are properly torqued.
Attach the shield restraint chains, allowing sufficient slack for the driveline to
19
move during turns and operation.
Best results are achieved when the chains are attached nearly perpindicular to the
driveline guard. Adjust the length to allow articulation of the driveline in working or
transport postions, but avoid excessive slack that may wrap around the driveline.
20
If the length of the chain is not adjusted correctly and tension is excessive,
for example during machine maneuvers, the "S" connection hook will open
and the chain will disconnect from the shield.
In this case, replace the chain.
The "S" hook of the new chain must be inserted in the eyelet of the base cone and
must be closed to prevent it slipping and maintain its form.
21
If the length of chain is not adjusted correctly and tension is excessive, for
example during machine maneuvers, the "Spring Link" connection will open
and the chain will disconnect from the shield.
The chain may be easily reconnected as described in the following procedure.
22
Open the locking ring by loosening the screw and removing the plate.
23
Insert the chain in the locking ring and reposition the plate.
24
Close the plate by means of the screw.
25
Never use the shield restraint chains to support the driveline for storage.
Always use the support on the implement.
540 min
-1
Pn
CV-HP-PS
18
28
38
50
55
70
90
90
110
132
169
254
Mn
N∙m kW
234 20
364 31
494 42
651 55
716 61
911 78
1171 100
1171 100
1431 122
1717 147
2199 187
3183 284
1000 min
-1
Pn
CV-HP-PS
27
42
57
75
83
106
136
136
166
200
254
386
ENG
Mn
N∙m
190
295
400
527
583
745
956
956
1166
1405
1785
2712
17