Publicidad
Idiomas disponibles
Idiomas disponibles
5/8" Bolt
(3 used in this step)
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,
go back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Locate the Spine (D) and set the back face down on a scratch-free surface.
3. Fit the Top Shelf Frame (A) onto the Spine (D) making sure the mounting holes on the end
bracket overlap the threaded sockets on the spine properly.
4. Fasten the Top Frame Support (F) to the middle rail of the Top Shelf Frame (A) and the Spine
(D) with three 5/8" Bolts (2) and three Washers (6 and 7).
Assembly Instructions
A
D
F
Lock Washer
(3 used in this step)
②
D
F
D
⑥
4
A
A
Flat Washer
(3 used in this step)
⑦
Publicidad
