Control Panel - Hamilton Beach HVC254-CE Manual De Operación

The complete CE declaration of conformity documentation for this appliance is available in the
Technical Support section of our website www.hamiltonbeachcommercial.com.
Recycling the Product at the End of Its Service Life
The wheeled bin symbol marked on this appliance signifies that it must be taken over by a selective
collection system conforming to the WEEE Directive so that it can be either recycled or dismantled in
order to reduce any impact on the environment. The user is responsible for returning the product to
the appropriate collection facility, as specified by your local code. For additional information regarding
applicable local laws, please contact the municipal facility and/or local distributor.

Control Panel

ON (I)/OFF ( ) FUNCTION SELECT
Turns the unit Selects vacuum or
on and off. seal modes.
PROGRAM SELECT/
OIL PREHEAT
FUNCTION
Enters program
switching mode.
When pressed for
more than 3 seconds,
initiates preheating
function.
4
DISPLAY
Shows active
function during
program cycle or
set value when
idle. Counts
down time
remaining for
each step in the
process.
8.8
SEAL INDICATOR
Indicates sealing
mode is selected or
activated.
VACUUM INDICATOR
Indicates vacuum mode
is selected or activated.
+/STOP VAC
During cycle, stops
vacuum process
and continues to
sealing process.
Increases
time when
programming.
–/STOP VACUUM GAUGE
During cycle, Indicates the vacuum
interrupts pressure in the
process and ends vacuumed space.
cycle. Decreases
time when
programming.