URCERI FSK-909 Manual De Instrucciones página 5

All manuals and user guides at all-guides.com
Thank you for choosing Urceri. Please read the manual before use.
Features
● Compact and lightweight, it is a handy little tool that gets the job
done.
● Ceramic heating core allow the tool to work continuously for a long
time.
● Preset temperature and maintain a constant temperature.
● Reach the desired temperature rapidly, in around 15 secs.
Using and Maintaining Soldering Iron
1. Do not subject this product to excessive shock. Doing so would
cause damage to its heating element.
2. You need to clean and tin the soldering iron tip regularly to remove
contaminants and protect the tip from oxidation. Follow the guidance
here:
(a) After the soldering iron cools down, clean the tip with wet sponge.
Do not use abrasive tools such as files.
(b) After the tip is cleaned, cover the tip with a thin coating of solder.
However, if the tip surface has oxidized (turned black), solder won't
stick to it.
3. When soldering is done, unplug the tool. Allow the tool to cool
down slowly and naturally. Do not immerse the tool in water.
4. Please be aware of the following information if you are going to use
flux (not included):
● If the surface of iron tips has oxidized, do not try to clean the tip
with (liquid) flux.
● Most flux would generate acid fumes when heated, which would
cause damage to heating element, corrode iron tip and shorten the
life of this product.
● The residue of burnt flux will make fixing this joint difficult.
Therefore, make sure to clean the residue after use.
EN-1