Work Pro W MD 82 AX MKII Manual De Instrucciones página 5

2.3 Choosing Wire and Connectors
Figure 2.3 Input and Output Wiring
2.4 Wiring Your Audio System
Professional audio system
Figure 2.4
2.4 Wiring Your Audio System
Typical input and output wirings are shown in Figure 2.4.
INPUTS: Connect input wiring for both channels using the Euroblock input for each channel.
OUTPUTS: The mixer's line level output may be connected to the input of a power amplifier.
RS485: Connect an external device which generates control commands
Connect your mixer to the AC mains power source (power outlet) with the supplied AC power cord. First, connect
the IEC end of the cord set to the IEC connector on the mixer; then, plug the other end of the cord set to the AC
mains.
WARNING: The third prong of this connector (ground) is an important safety feature. Wired it
adequately and do not disable this ground connect on by using an adapter or other methods.
4
OUTPUT CONNECTOR