Publicidad
Idiomas disponibles
Idiomas disponibles
TVC410C
INSTALLATION
Fix the bottom of the articulation to the wall after having pierced and applied the dowel. Make sure of
having fixed it in a good way and that the wall surface is plane and not subject to vibrations.
Open the detector and fix the bottom into the articulation. Screw up the dowel after having oriented the
detector.
Set the jumpers according to the video cable that you use:
1 VIDEO = coaxial cable 75ohm
2 BALANCED = using impedance matching (for use only with connectors type
BNC200,BNC101 ecc)
Screw up the joint after the detector oriented
NOTE:
Do not point it towards objects that could produce sudden changes of temperature, as central
heating, radiators, air-conditioners, flames, etc.
To carry out the connections second the brought back outline of continuation:
Jumper
mode selection
VIDEOBALUN or COAXIAL
BALANCED
VIDEO
1
2
Trimmer regulation
4
sensibility
TVC410C
BALANCED
+
security
Burglary central
unit
Z1
COM
12Vcc
Publicidad
