Replacing The Cutting Head; Corner Cutter - Olympia Vario Duplex 5000 Manual De Instrucciones

Replacing the Cutting Head

When the blade of the cutting head is damaged or worn, it must be replaced.
1 Remove the end cap from the base plate (Fig. 8, A).
2 Remove the guide rail from the base plate (Fig. 8, B).
3 Replace the old cutting head with a new one (Fig. 8, C)
4 Slide the guide rail in the base plate.
5 Insert the end cap in the base plate.

Corner Cutter

1 Place the material to be cut in the corner cutter
(max. 1 sheet) (Fig. 9, A).
2 Press the button (Fig. 9, B).
3 When the process is completed, remove the clippings tray and empty
it (Fig. 10).
Fig. 9
Fig. 8
18
Fig. 10