mabe MCL2040PSBB Manual Del Uso Y Cuidado página 59

In the dryer
Possible causes
Inconsistent Type of heat
drying times
Clothes take
Improper sorting
too long to dry
Large loads of
heavy fabrics
(like beach towels)
Improperly set controls
Improper or
obstructed ducting
Blown fuse or
tripped circuit breaker
Overloading
/combining loads
Clothes are Overdrying
wrinkled
Letting items sit in dryer
after missing translation
Overloading
Clothes Some fabrics shrink
shrink naturally when washed.
Others can be safely
washed but may shrink
in the dryer.
What to do
Automatic drying
according to the type of heat used
(electric, natural or LP gas), load size, type
of fabric, wetness of clothes and condition
of exhaust ducts.
Separate heavy items from lightweight
items.
(generally, a well sorted washer load is a
well-sorted dryer load).
Large, heavy fabrics
moisture and take longer to dry. Separate
large, heavy fabrics into smaller loads
missing translation time.
Match control settings to the load you are
drying.
Check installation instructions for proper
ducting/venting.
Make sure ducting is clean, free of kinks
and unobstructed.
Check to see if outside wall damper
operates easily.
Check the installation instructions to make
sure the dryer venting is correct.
Replace fuses or reset circuit breakers.
Since most dryers use 2 fuses/breakers,
make sure both are operating.
Do notput more than one washer load in
the dryer at a time.
If you are drying only two items, add
missing translation drying.
Select a shorter drying time.
Remove items while they still hold a slight
amount of moisture. Select a missing
translation LESS DRY or DAMP DRY setting.
missing translation
immediately.
Separate large loads into smaller ones.
To avoid shrinkage, follow garment care
labels exactly.
Some items may be pressed back into
shape after drying.
If you are concerned about shrinkage in a
particular item, do not wash or dry it.
times will vary
contain more
fold or hang
27