Troubleshooting
Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer or service outlet if
problems persist. Be sure all connections are properly made when using with other units.
SYMPTOMS
•
Make sure the power cord is plugged in.
TV does not
•
Try another AC outlet.
operate.
•
Power is off, check fuse or circuit breaker.
•
Unplug unit for an hour, then plug it back in.
•
Station or Cable TV experiencing problems,
Poor sound
tune to another station.
or no sound.
•
Check sound adjustments (Volume or Mute).
•
Check for sources of possible interference.
•
Station or Cable TV experiencing problems,
tune to another station.
•
Make sure channels are set into memory.
Poor picture
•
Check antenna or Cable TV connections,
or no picture.
adjust antenna.
•
Check for sources of possible interference.
•
Check picture control adjustments.
•
Station or Cable TV experiencing problems,
Poor
tune to another station.
reception on
•
Make sure channels are set into memory.
some
•
Station is weak, adjust antenna to receive
channels.
desired station.
•
Check for sources of possible interference.
•
Station or Cable TV experiencing problems,
tune to another station.
•
Make sure channels are set into memory.
Poor color or
•
Check picture control adjustments.
no color.
•
Check antenna or Cable TV connections,
adjust antenna.
•
Check for sources of possible interference.
•
Station or Cable TV experiencing problems,
Picture
tune to another station.
wobbles or
•
Make sure channels are set into memory.
drifts.
•
Cable TV company is scrambling signal.
•
Adjust antenna.
•
Set the "E-POP Demo" in the Auto Setup
Cannot delete
menu to "Off".
E-POP .
•
To access Auto Setup TV must be in the TV input.
FOR CUSTOMER SERVICE, ADDITIONAL SET-UP AND OPERATING ASSISTANCE, OR TO ORDER ACCESSORIES PLEASE CALL:
WHEN CALLING CUSTOMER SERVICE – PLEASE HAVE YOUR MODEL NUMBER READY
EN 26
POSSIBLE SOLUTIONS
1-800-289-0981 (USA/CANADA), 01-800-703-0885 (MEXICO)
SYMPTOMS
Digital
broadcasting
screen
problem.
No CATV
reception.
Horizontal
or diagonal
bars on
screen.
No reception
above
channel 13.
No Remote
operation.
TV shuts off.
Closed
Caption is
not activated.
TV is not
shown in your
language.
OR WRITE TO:
ORION SALES, INC.
3471 N. UNION DR.
OLNEY, ILLINOIS 62450
POSSIBLE SOLUTIONS
•
Check digital signal strength.
•
Check all Cable TV connections.
•
Set Air/Cable menu option to the Cable mode.
•
Station or Cable TV system problems, try
another station.
•
Check antenna connections, adjust or re-
direct antenna.
•
Check for sources of possible interference.
•
Make sure Source option is in the appropriate
mode.
•
If using antenna, check UHF antenna
connections.
•
Batteries are weak, dead or inserted incorrectly.
•
Remote is out of range, move closer to TV
(within 15 feet).
•
Make sure Remote is aimed at sensor.
•
Confirm there are no obstructions between the
Remote and the TV.
•
Make sure the power cord is plugged in.
•
Sleep Timer is set.
•
Power interrupted.
•
TV station experiencing problems or program
tuned is not closed captioned. Try another
channel.
•
Check Cable TV connection or VHF/UHF
antenna, reposition or rotate antenna.
•
Set Closed Caption Decoder in the menu.
•
Select proper language in the menu options.