Tool it 024212 Traducción De Las Instrucciones Originales página 7

Translation of the original instructions
• This product should be recycled appropriately (according to
the decree n°2014-1577)
INSTALLATION OF THE APPLICATION
Download and install the application: «Wireless Battery Monitor – Tool It».
- Requires iOS 7.0 or a later version for Apple devices.
- Requires Android 4.3 or a later version.
Configuration of a new user:
You must register when you use the application for the first time.
- Open the application on your mobile device.
- Press «Sign Up» at the bottom right of your screen.
- Fill in all required fields:
1
2
3
4
5
- A window «Register Success» appears on your screen. Press «Enter Now» to access the application.
CONNECTION OF THE BATTERY CHARGE INDICATOR
1- To ensure a precise test: the vehicle must be switched off for at least 10 minutes OR switch on the headlights for 3
minutes and then switch them off.
2- Make sure that the battery terminals are clean. If necessary, clean them with a metallic brush. (This module works
better when the battery terminals have been removed and cleaned).
Any rust between the tester terminals, battery connectors or battery terminals reduces the effectiveness of the
battery charge indicator.
3- Connect the negative terminal (black) to the battery's negative terminal (NEG, N, -). Connect the positive terminal
(red) to the battery's positive terminal (POS, P, +).
OPERATING INSTRUCTIONS
- Activate the wireless technology (bluetooth) in your phone settings.
- Open the application on your mobile device and log in.
- Make sure that the battery charge indicator is properly connected to your vehicle's battery.
1
WIRELESS BATTERY MONITOR
Enter a valid email address. If you want to register with your mobile phone number,
1
tick the box «Phone number register» and enter your phone number in this field
Press «Get» to receive a validation code by email (or SMS) and enter it when you
2
receive it.
Choose a password.
3
Confirm the password.
4
When all the fields of the form are filled in, press «Sign Up».
5
Press «Add» to add
a charge indicator in
your application.
2
EN
.
1
Press OK to allow the
charge indicator to
access your phone's
camera.
7