Esma DS 201 RX Manual De Instrucciones página 7

DS 201 RX MULTI WIFI
RX MULTI WIFI 433-868 MHz MANUAL
1. RX Multi WiFi connection diagram
2. Selecting a brand
The 8 DIPs selector allows to choose the brand of the remote we
want to work with. The brands available are shown on table 1. Each
channel can store up to 250 remotes.
3. Learning button and LED
In the RX Multi receiver there are two independent channels. Each of
them have the corresponding learning button (S1 and S2) and the
corresponding LED (L1 and L2).
Channels 1 and 2 are monostable. The impulse given lasts for 3
•
seconds.
4. Selecting the power supply input
The RX Multi can work with a voltage range of AC/DC 9 V ~ 30 V.
However, the best way to regulate this is to change the position of
the jumper depending the power input.
5. Learning a button or a remote:
1. Choose the corresponding DIP combination for the chosen
brand of the remote that will be used, according to table 1.
2. Press the learning button (S1 or S2). The corresponding LED
(L1 or L2) will turn on.
3. Press the button of the remote you want to use. The LED of
the chosen channel will start flashing for 5 seconds. This will
mean the remote or the button has been learnt in the RX Multi.
For learning any additional remote or button, please repeat steps
number 2 and 3.