Scanning Documents In Pc Mode (Windows Pc Only) - IRIScan Pro 3 Wi-Fi Guía Rápida Del Usuario

Quick User Guide - English
7. Scanning Documents in PC Mode (Windows PC
only)
On a Windows PC the IRIScan
you can use it to scan directly from software applications such as Readiris
IMPORTANT: make sure you have installed the scanner's Twain driver. See
the Software.
1. Connect the scanner to your computer using the USB cable.
2. Power on the scanner.
3. Press the SD/PC Wifi button once.
PC is now displayed on the LCD-display.
4. Load your documents into the scanner.
7.1 Scanning Documents in Readiris
1. Start Readiris
When you start Readiris
Yes and enter the Activation code you find on the label inside the DVD
box. Then click OK.
Note that an internet connection is required to do the activation.
2. Click the down arrow below Scan, and click Settings.
3. Click Configure to select the Twain source.
4. Select IRIScan
If the IRIScan
correctly.
5. Click Scanner Model and select IRIScan
You can now configure the scanner settings in the Readiris
Or select IRIScan
Properties dialog box opens before scanning. In that window you can
configure advanced scanner settings. See section 4.4 of the IRIScan
Wifi User Guide on the DVD-ROM.
6. Click OK to close the scanner settings.
7. Then click Scan inside Readiris
Pro 3 Wifi can also be used as Twain scanner, meaning
TM
.
TM
for the first time you are asked to activate it. Click
TM
Pro Wifi 6.0 from the list, and click Select.
TM
is not listed here, it means the driver has not been installed
TM
Pro 3 Wifi (User Interface). In that case the Scanner
TM
to scan your documents.
TM
14
TM
Pro 3 Wifi.
TM
dialog box.
TM
and Cardiris .
TM TM
Installing
Pro 3
TM
11