Operating Tips - EarthWise LM71313 El Manual Del Propietario

•
Never allow children or people unfamiliar
with the instructions use the product.
•
Keep children, bystanders and pets away
while operating the leaf mulcher. Stop
using the machine while people, especially
children, or pets are nearby;
•
Consider the environment in which you are
working. Keep the working area free from
wires, sticks, stones and debris
•
Keep in mind that the operator or user is
responsible for accidents or hazards
occurring to other people or their property.
•
Work only in daylight or good artificial light
•
Avoid accidental starting. Ensure the
switch is in the OFF position before
plugging in. Carrying power tools with your
finger on the switch or plugging in power
tools that have the switch on invites
accidents.
•
Never operate the machine with damaged
guards or without the guards in place.
•
Before use, examine the power cord and
extension cable for damage or aging. If
there are signs of damage, it must be
replaced by a qualified service technician.
If the cord becomes damaged during use,
disconnect the cord from the power supply
immediately. DO NOT TOUCH THE
POWER CORD BEFORE
DISCONNECTING THE SUPPLY.
•
Before using the machine and after any
impact, check for signs of wear or damage
and repair as necessary.

OPERATING TIPS

•
Keep the power and extension cords away
from the cutting elements.
•
Do not expose the machine to rain or wet
conditions.
•
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
•
When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
•
Never operate the product when you are
tired, ill or under the influence of alcohol,
drugs or medicine.
•
Use safety equipment. Always wear eye
protection. Safety equipment such as dust
mask, non-skid safety shoes, hard hat,
suitable gloves, or hearing protection used
for appropriate conditions will reduce
personal injuries.
•
Do not overreach. Keep proper footing and
balance at all times. This enables better
control the power tool in unexpected
situations.
•
Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be
caught in moving parts.
•
Keep hands and feet away from the cutting
means at all times and especially when
switching on the motor
•
Take care against injury from the blade
fitted for trimming the nylon line length.
After extending new cutter line always
return the machine to its normal operating
position before switching on.
7
Model LM71313