Safety Regulations - Tetra WP 300 Instrucciones De Uso

Ocultar thumbs Ver también para WP 300:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 17
UK
Dear customer,
Congratulations on choosing
your highly reliable, easy to
maintain Tetra Water Pump.
This TÜV tested product is
manufactured from the highest
quality materials. As a result, you
can be sure of its reliability and
safety. Please read the following
instructions very carefully before
using your new Tetra WP.
Tetra WP Water Pump
A. Pump Body
B. Impeller
C. Pump Housing
D. Flow rate adjuster
E. Suction Cups (2x for WP 300,
4x for WP 600 / WP 1000)
F. Bearing (Spare Part only)
for WP 600 / WP 1000
Instructions
Installation
Attach the enclosed suction
cups into the openings located
on the bottom of the pump body
and pump housing. (fig. 1)
Using the suction cups, attach
the water pump below the
water surface at your chosen
position on the bottom or the
side of the tank. (fig. 2)
Operation
To adjust the water flow, slide
the flow rate adjuster within
the minimum and maximum
range. (fig. 3)
Ensure that the electrical cord
loops (indoor applications)
below the electrical outlet
forming a „drip loop". This
prevents the water from
running down the cord and
into the electrical outlet. (fig. 5)
To start the water pump,
simply plug it in!
6
Operation/ Maintenance
Attention! Before any kind
of maintenance is carried out,
ALWAYS
disconnect
electrical supply of the pump
and any other appliance
placed in the water.
• Regular
maintenance is recommended
for maximum use and
performance
• Remove the pump housing
from the motor body (fig. 4)
• Remove the impeller from
the mounting
• Wash the pump wheel
and clean with a soft brush
• Reassemble everything in
reverse order

Safety Regulations

Attention! Before any kind
of maintenance is carried
out, always disconnect the
electrical supply of the pump
and any other appliance
placed in the water.
The pump will be destroyed
if operated dry. Always
ensure that there is water
water flowing through the
pump when in operation.
The pump is intended
for indoor use only in
temperatures that do not
exceed 35°C.
Before connecting to the
main power supply be sure
the cord and the pump are
undamaged. This appliance
can be used by children
aged from 8 years and
above and persons with
reduced physical, sensory
or mental capabilities or
the
cleaning
and

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wp 600Wp 1000

Tabla de contenido