Manhattan 178693 Manual De Instrucciones página 4

Initial Setup / Built-in Battery Charging
Prior to initial use as a wireless headset, the built-in battery needs to be charged. A full
charge can take up to 4 hours, but you can listen to music or make phone calls while
charging.
1 Use the included USB-to-micro USB cable to connect the headset (H) to a powered
computer or other charging device.
2 The LED (A) lights red while charging and turns off when the charge is complete. Note:
The LED flashes red to indicate low voltage. Recharge the battery as soon as you can.
Bluetooth Pairing & Operation
This product utilizes the latest in Bluetooth wireless technology; wireless performance
may vary from device to device. If using this product with a Mac or PC, ensure that your
Bluetooth driver is up to date. If it isn't, visit your computer manufacturer's website for
details and updates.
1 Press the Multifunction button (B) for about 7 seconds, until the LED (A) alternately
flashes red and blue. Note: Pressing the Multifunction button for just 3 seconds will put
the headset in Standby mode (the LED flashes blue).
2 With the headset LED (A) alternately flashing red and blue, activate your device's
Bluetooth function and search for Bluetooth devices. Refer as needed to the manual of
your phone, tablet, computer, etc. regarding the Bluetooth operation of your source
device.
3
Once the device finds "manhattanFLEX, " an on-screen prompt will ask if you're
ready for pairing. Click or press OK or Confirm to continue. Note: If the device prompts
you to enter a PIN, enter 0000 and click or press Yes or Confirm to continue.
• After a successful connection is made, the LED (A) will flash blue and the headset will
beep. If the pairing has failed and the LED is still alternately flashing red and blue, the
pairing procedure needs to be re-initiated on your source device.
• This headset can connect with two types of devices: those using a Hands-Free or Headset
Profile (HFP or HSP), such as smartphones; and those using an Advanced Audio
Distribution or Audio/Video Remote Control Profile (A2DP or AVRCP), such as laptops.
• Every time the headset is turned on, it will automatically connect to the last connected
device.
Power on / Standby Press the Multifunction button (B) about 3 seconds. The LED (A) flashes blue.
Power off Press the Multifunction button (B) about 3 seconds. The LED (A) turns red with an audio
confirmation.
Pairing Press the Multifunction button (B) about 7 seconds (until the LED alternately flashes red and
blue).
Answer/End a call Briefly press the Multifunction button (B).
Reject a call
Press the Multifunction button (B) for about 2 seconds (until you hear a beep).
Last number redial In Standby mode, press the Multifunction button (B) for about 2 seconds (until it beeps).
Play/Pause Press the Multifunction button (B) to play or pause music.
Volume up/down Press + (C) or – (D) to increase or decrease the volume.
Previous
Briefly press
Next Briefly press
Voice dial* In Standby mode, double-press the Multifunction button (B) and listen for the beep that
indicates you can start to voice dial. *Not all phones feature this option.
Voice transfer During a call, press the Multifunction button (B) for about 2 seconds (until you hear a beep).
The beep indicates you've switched between music and phone call modes.
4
ENGLISH
Quick Reference Guide
I
(E) to play the previous song in a playlist.
tt
I
(F) to play the next song in a playlist.
uu