Cequent Performance Products 76024 Instrucciones De Instalación página 6

BlueTec vehicles only – raise DEF tank and secure the mounting strap using the
hardware that was removed in step 5. Secure the DEF tank mounting tab using the
hardware removed in step 5.
Raise exhaust – Raise and secure the exhaust lowered in step 3.
©2016 Cequent™ Performance Products, Inc. - Printed in Mexico
Raise the mounting plate into position and secure the hitch to the cross member using
the 1/2''-13 x 4" hex bolts and 1/2'' conical toothed washers (teeth side against hitch).
Tighten M8 fasteners to 25 Lb.-ft. (34 N*M) and M10 fasteners with torque wrench
to 38 Lb.-Ft. (52 N*M) and 1/2" fasteners to 75 Lb.-ft. (102 N*M)
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Trim and Reinstall DEF tank shield – (BlueTec vehicles only) Trim 4" from inboard edge
of shield (Figure 3)Reinstall DEF tank shield removed in step 1.
Secure fascia tabs - Using the cable ties provided attach the fascia tabs to the hitch
cross tube.
Sheet 6 of 18 76024NP 5-5-16 Rev. A