Leviton 078477296011 Manual De Instrucciones

Medical Grade Power Strips with Load Monitoring Inform™ Technology
Rated Max: 125 VAC, 60 Hz, 12 Amp Regulatory Derated
4 Outlet
Non-Surge 53C4M-1Nx
Surge 53C4M-1Sx
x = Length of cord:
5 = 15ft (4.57m) cord and 7 = 7ft (2.13m) cord
WARNINGS:
• TO AVOID FIRE, do not plug into another re-locatable power tap or extension cord.
• To be installed and/or used in accordance with appropriate electrical codes and regulations.
• If you are not sure about any part of these instructions, consult an electrician.
• Only connect to a properly grounded outlet.
WARNINGS FOR SURGE MODELS ONLY:
• Do not install this device if there is not at least 30 feet (10 meters) or more of wire between the electrical outlet and the
electrical service panel.
• This device features internal protection that will disconnect the surge protective component at the end of its useful life but
will maintain power to the load now unprotected. If this situation is undesirable for the application, follow the manufacturer's
instructions for replacing the device.
DESCRIPTION
Leviton's Medical Grade Power Strips are designed for use in rugged medical environments such
as patient care areas. They comply with UL 60601-1 (Medical Electrical Equipment) and
UL 60950-1 (Information Technology Equipment) standards and are certified to UL 1363A (Special
Purpose Re-locatable Power Tap) to supply power to plug-connected medical equipment in patient
care vicinities as defined in NFPA 99. These power strips have ETL determined compliance to all
UL standards mentioned in this instruction sheet.
These Medical Grade Power Strips are available in non-surge and surge models. Surge models
meet the UL 1449 3rd Edition standard and are classified as Type 3 surge protective devices. The
strips are available in 4 or 6 outlet versions with 7 or 15 foot power cords. Each outlet is protected
by a unique cover designed specifically for patient care areas.
For a list of all standards and compliance see specifications section below.
SPECIFICATIONS
All Models
• 5 Year Limited Warranty
• NFPA 99 - Complies with requirements as it
pertains to patient care vicinities.
• UL 60601-1, UL 60950-1, UL 1363A
• Hospital Grade receptacles
• Hospital Grade molded plug
• Lockable individual outlet covers
• Resettable, 15 or 20 Amp circuit breaker
• Rugged metal housing
• Easily accommodates surface mounting
• Green power LED indicates power is present
• Yellow load monitoring LED is on all models
• Class 1 equipment
• Operating temperature: 0 o C to 40 o C (32°F to 104°F)
• Relative humidity: 5% to 95% non-condensing
• Transport and storage temperature:
-10 o C to +50 o C (14°F to +122°F)
OPERATION
1. Plug power cord into 125 VAC outlet.
2. All Models: The green "POWER" LED will illuminate when power is applied.
"LOAD MONITOR" LED will illuminate Yellow when power strip exceeds the NFPA 99 75% of allowable
amperage.
Surge Models only: The green "PROTECTION" LED will illuminate when surge protection is active.
3. To open outlet cover, use a plug blade of the component to be plugged in as shown
in FIGURE 1.
4. To close cover, press down until it snaps closed.
5. Operating symbols:
- Power LED: Indicates power is present when lit.
- Protection LED (surge models only): Indicates surge protection is active when lit.
- Load Monitor: Steady Yellow LED indicates unit exceeds 75% of amperage.
- : Green dot indicates hospital grade outlet.
- : AC Symbol indicates alternating current.
- : Earth ground symbol indicates grounding electrical point.
- : Meets direct support requirements for current carrying parts at 120 V rms or less
and 15 A or less.
6. LOAD MONITORING:
This power strip contains a load monitoring feature which will notify the user when 75% of the rated
cord current has been reached. A rule under the NFPA 99 states: "The sum of the ampacity of all
appliances connected to the outlets does not exceed 75 percent of the ampacity of the flexible cord
supplying the outlets".
Note: A momentary blink of the yellow load monitoring LED may occur when a load is applied. This is
due to inrush current briefly exceeding the 75% limit. As long as the steady-state condition of the load
monitoring LED is not illuminated, the load is within the NFPA 99 allowable limit.
INSTALLATION - FLYING LEADS MODELS ONLY
Models containing flying leads (no power plug) must be hardwired correctly to maintain power, protection and
polarity status.
1. WARNING: TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER at circuit breaker
or fuse and test that power is off before wiring!
2. Connect leads to 125 VAC single phase power source as shown in FIGURE 2.
3. Restore power at circuit breaker or fuse.
MOUNTING
Medical strips can be surface mounted using mounting holes on either end of strip.
1. Mark mounting surface using medical strip as template.
2. Drill holes and attach strip using screws (not supplied).
3. Refer to FIGURE 3 for mounting dimensions.
CARE AND MAINTENANCE
WARNING: Do not spray with liquid cleaning products.
• To clean, unplug unit and wipe with a clean cloth.
• Check status LEDs monthly. Normal operation requires LEDs to be lit.
• Check circuit breaker (CB) status monthly. Normal operation requires CB to be depressed.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada ULC to the attention of the Quality Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or
by telephone at 1 800 405-5320.
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for five years from the purchase date. Leviton's only obligation is to correct
such defects by repair or replacement, at its option. For details visit www.leviton.com or call 1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an
improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions. There are no other or implied warranties of any kind, including merchantability and fitness for
a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a particular purpose, is limited to five years. Leviton is not liable for incidental, indirect, special, or consequential
damages, including without limitation, damage to, or loss of use of, any equipment, lost sales or profits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
6 Outlet
53C6M-1Nx
53C6M-1Sx
INSTALLATION
Surge Models Only
• UL 1449 3rd Ed. Type 3 device
• 18mm MOV fused SPD circuitry
• Green protection LED indicates surge protection
is active
• Multi-line protection (L-N, N-G, L-G).
• Voltage Protection Ratings (VPR):
L-N: 600Vpk
L-G: 600Vpk
N-G: 500Vpk
• Maximum surge current rating per mode:
(L-N): 27kA
• Joule rating:
644j
• Maximum Continous Operating Voltage (MCOV):
150 V
• EMI/RFI noise reduction:
-6db to -29db (100kHz to 100mHz)
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
For Technical Assistance Call: 1-800-824-3005 (USA Only) or 1-800-405-5320 (Canada Only) www.leviton.com
Rated Max: 125 VAC, 60 Hz, 16 Amp Regulatory Derated
Non-Surge
Surge
5 = 15ft (4.57m) cord and 7 = 7ft (2.13m) cord
CAUTIONS:
• FOR INDOOR USE ONLY.
• Electromagnetic field may interfere with other equipment. If
interference occurs, move medical strip away from equipment
being affected.
• No user serviceable parts inside.
• Only outlet Medical Grade power strips can be used with emergency
trolley carts.
• The socket outlet should be installed near the equipment and be
easily accessible.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
FIGURE 1 | FIGURE 1 | FIGURA 1
1
Insert plug blade to release cover.
Insérer la lame d'une fiche pour libérer le capuchon.
Inserte la cuchilla de la clavija para sacar la cubierta.
FIGURE 2 | FIGURE 2 | FIGURA 2
Green/Yellow |Vert / Jaune
FIGURE 3 | FIGURE 3 | FIGURA 3
DIMENSIONAL SPECIFICATIONS | SCHÉMAS DIMENSIONNELS
ESPE VCIFICACIONES DIMENSIONALES
All Models| Tous les modèles | Todos los modelos
(Side View | Vue de profil | Vista lateral)
1.67 in
(4.24 cm)
MEDICAL GRADE
COMPLIANT WITH
NFPA 99 REQUIREMENTS
FOR PATIENT CARE AREAS
POWER INDICATOR
POWER
TÉMOIN D'ALIMENTATION
PROTECTION
LOAD MONITOR
INDICADOR DE
EXCEEDED NFPA 99
CURRENT LIMIT WHEN LIT
16.87 in
CORRIENTE
(42.84 cm)
Insert plug blade Press on edge of
to release cover cover to close
PROTECTION INDICATOR
TÉMOIN DE PROTECTION
16.00 in
INDICADOR DE
(40.64 cm)
PROTECCIÓN
LOAD MONITOR
INDICATOR
TÉMOIN DE CHARGE
INDICADOR DEL MONITOR
DE CARGA
53C6M-1SX
(Top View | Vue du dessus
Vista superior)
4 Outlet 6 Outlet
53C4M-2Nx 53C6M-2Nx
53C4M-2Sx 53C6M-2Sx
x = Length of cord:
2
Press on edge of cover to snap closed.
Appuyer sur le rebord du capuchon pour l'enclencher.
Presione en el borde la cubierta para
Brown |Brun|Marrón
Line |Ligne| Línea
Neutral |Neutre|Neutro
Blue |Bleu|Azul
Ground |Mise à la terre|Tierra
Verde / Amarillo
1.54 in
(3.91 cm)
2.60 in
(6.60 cm)
13.00 in
MEDICAL GRADE
(33.02 cm)
COMPLIANT WITH
NFPA 99 REQUIREMENTS
FOR PATIENT CARE AREAS
POWER
PROTECTION
LOAD MONITOR
EXCEEDED NFPA 99
CURRENT LIMIT WHEN LIT
Insert plug blade Press on edge of
to release cover cover to close
53C4M-1SX
(Top View | Vue du dessus
Vista superior)
PK-A3311-10-02-0A
ENGLISH
cerrar.
125 V AC/CA
60 Hz
13.80 in
(35.05 cm)
PK-A3311-10-02-0A