PCE Instruments TLM-160i Manual De Empleo página 10

D
Operation
GB
F
Switching on/off
I
ON Device and laser are switched on.
DIST
E
The battery symbol is displayed until a key is pressed.
P
Holding down this key switches the
NL
device off.
~1 sec.
The device also switches off automatically after three
DK
mintutes of inactivity i.e. no key is pressed within
S
that interval.
N
CLEAR-Key
FIN
The last action is cancelled
J
Within a function (area, volume, etc.) single measure-
CN
ments can be deleted step by step and re-measured.
ROK
Illumination
PL
Switches the illumination on or off.
HR
H
Reference Setting
RUS
Default reference setting is from the rear of the
CZ
instrument.
The next measurement references the front of
GR
the instrument.
LT
After one measurement, the reference returns auto-
matically to the default setting (rear reference). See
LV
drawing {D}.
EST
TR
Operation
RO
BG
Measuring
Single Distance Measurement
Press to activate the laser. Press again to
ON
DIST
trigger the distance measurement.
The result is displayed immediately.
Continuous Measurement
This functions enables distances to be staked out.
See drawing {E}.
Press and hold key down until a "beep"
ON
DIST
sound is.heard.
~1 sec.
Press key again briefly: continuous meas-
ON
DIST
urement is stopped.
The last measured value is displayed in the summary
row.
Functions
Addition / Subtraction
Distance Measurement.
The next measurement is added to the
previous one.
The next measurement is subtracted from the
previous one.
Repeat this procedure for as many times as required.
The result is always displayed in the summary row,
the previous value is displayed in the second row.
The last operation is cancelled.
2
TLM160 1.0.0 gb