Metra 99-7806B Instrucciones De Instalación página 5

ISO DDIN radio provision 1996-1998
1. Select radio housing B.
2. Attach the radio brackets to the radio
housing using (4) of the #8 x 3/8"
screws supplied and attach the radio
brackets to the climate controls with
factory hardware. (Figure A)
3. Slide the radio into the bracket/radio
housing assembly and secure to the
assembly using the screws supplied
with the radio. (Figure B )
4. Locate the factory wiring harness and
antenna connector in the dash. Metra
recommends using the proper mating
adapter from Metra or AXXESS. Test the
radio for proper operation. Insert the
(3) buttons from the factory radio panel
into the radio housing.
5. Secure the the radio assembly to the dash
using the factory screws. Reassemble the
dash in reverse order of disassembly to
complete the installation.
KIT ASSEMBLY
(Figure A) (Figure B)
5
REV. 2/26/2019 INST99-7806B