oneConcept 10030674 Manual De Instrucciones página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Insert the Rotary disc into the
middle flat side of food, then put
into the
bowl lid.
Important Hints on Use
• Install the blade cone (C,D,E) inside the bowl lid correctly (rotate clockwise in correct
position).
• Insert the rotary cone into the middle flat side of the food (which side is smooth).
• Plug in, place motor unit into rotary cone with food and put down into blade cone. Then
press the button. The unit is working normally.
• Release the button, the unit stop working.
• When change blade cone, take out the using blade cone by rotating anti-clockwise. Install
other blade cone by rotating clockwise.
• The unit has start/stop button, keep press the button for continuous working.
• In order to obtain best results, we recommend that you select unbent food.
Cleaning and Care
• Always unplug the appliance before cleaning the motor unit.
• Do not immerse the motor unit, do not place under water. Clean the motor unit using a
damp cloth. Dry it carefully.
• The bowl can be rinsed under water but must not be placed in the dishwasher
• Handle the blades with care as the blades are extremely sharp.
• If the plastic parts become stained by foods such as carrots, rub the affected areas with
a cloth soaked in vegetable oil and then clean as normal.
10
5
Put the motor unit and
rotary disc with food to-
gether, plug in, keep press
the button by hand for
continuous working.
6
Motor unit, rotary disc,
all of the blade cone can
be stored inside the bowl.
Put them into the bowl by
piling all blade cones (as
below)
Storage

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

10030675

Tabla de contenido