24 ADJUSTMENT
Throttle Cable Installation, Adjustment
•
Link the throttle cable (G) to the speed control lev-
er (C) and loosely clamp the throttle cable outer
housing (F) with the cable clamp bolt (A).
•
Move the throttle lever to "FAST" position.
•
Pull up the outer housing (F) of the throttle cable
until the inner wire (G) has almost no slack, and
tighten the cable clamp bolt (A).
•
Move the throttle lever to "SLOW" position. Make
sure that the carburetor throttle valve (H) is moved
smoothly.
ADJUSTMENT
Choke Cable Installation, Adjustment
•
Link the choke cable (K) to the choke control lever
(D), and loosely clamp the choke cable outer
housing (L) with the cable clamp bolt (B).
•
Move the equipment choke control to "OPEN" po-
sition. Make sure that the carburetor choke valve
(I) is fully opened.
•
Pull up the outer housing (L) of the choke cable
until the inner wire (K) has almost no slack, and
tighten the cable clamp bolt (B).
•
Move the equipment choke control to "CHOKE"
position. Make sure that the carburetor choke
valve (I) is completely closed.
•
Make sure that the choke valve turns from fully
closed position to fully opened position when ac-
tuating the equipment choke control.