Manual Time Setting - Technoline WS 8009 Manual De Instrucciones

Ocultar thumbs Ver también para WS 8009:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 10
WS 8009 - Radio controlled wall clock
Instructions manual
Part A
A1: Radio controlled time
A2: Temperature
A3: Date and day of week
A4: Radio controlled icon
A5: Alarm icon
A6: Humidity
Set up and radio controlled time
Insert 3 x C batteries (not included) by observing the correct polarity signs (+/-) inside the battery compartment.
After inserting the batteries, the clock automatically starts scanning the DCF frequency signal after new batteries inserted (" "
flash on the LCD).
" " flash indicate DCF signal searching.
" " indicate signal received successfully.
"DST" icon will turn on when the DCF have DST signal in it.
The clock automatically scans the time signal at 3:00a.m. everyday to maintain accurate timing. For failed reception, scanning
stops (on the LCD disappear) and repeats again at 4:00a.m., 5:00a.m., 6:00a.m.
The clock manually scans the time signal by holding " " (B4) buttons for 2 seconds. For failed reception in 10 minutes,
scanning stops (" " on LCD disappear). And repeats again in the next hour. e.g. if scanning at 8:20a.m. fail, it will scan again at
9:00a.m.
Hold " " (B4) buttons for 3 seconds to stop scanning.
Notes:
Remove batteries and then insert batteries again to reset the unit if it does not work properly.
Avoid placing the clock near interference sources/metal frames such as computer monitor or TV sets.
Buttons will not function while scanning for DCF time signal unless they are well received or stopped manually.
Never use the clock in bathroom or any other area with high humidity
The clock loses its time information when the battery is removed.

Manual time setting

Hold "MODE" button (B2) until Hour digit flashes.
1.
Press "+" (B3) or "-" (B4) button to adjust Hour, Minutes, Second, Year, Month/Day sequence, Month, Date, Weekday Language,
2.
Time Zone.
Press "MODE" button (B2) to confirm each setting.
3.
Notes:
There are 8 languages for day-of-week-display: German, English, Denmark, Dutch, Italian, Spanish, French and Russian. The
languages and their selected abbreviations for each day of the week are shown in the following table:
Language
Sunday
German, GER
SON
English, ENG
SUN
Part B
B1: "SNOOZE" button
B2: "MODE" "SET" button
B3: "+" "12/24H" button
B4: "-" "C/F" button
B5: "ALARM ON/OFF" button
Monday
Tuesday
MON
DIE
MON
TUE
Part D
Wall mount hole
Stand
Battery compartment
Wednesday Thursday
MIT
DON
WED
THU
Friday
Saturday
FRE
SAM
FRI
SAT

Publicidad

Tabla de contenido
loading

Tabla de contenido