Using Your Humidifier (continued)
5. Fill the Water Tank with water, return the Water Tank Cap to its position and tighten it, and
return the Water Tank to the Base.
6. Plug the humidifier's Power Cord into a standard household power outlet.
7. Press the Power Button on the Control Panel.
8. To see the current humidity, press the Humidity button. To change the humidity, press and
hold the Humidity button for 3 seconds. The LED Display will flash the current humidity set-
ting. Press the Humidity button until the LEd display shows your desired humidity setting.
You can change the setting in 5% increments from 30% relative humidity to 80%. When
the LED Dispaly shows your desired humidity setting, release the Humidity button. After 2
seconds, the humidity setting is set and the LED Display will show the relative humidity.
9. To see the current Fan speed setting, press the Speed button. To change the Fan speed
setting, press and hold the Speed button for 3 seconds. The LED Display will flash the cur-
rent Fan speed setting. Press the Speed button until the LEd display shows your desired
Fan speed setting, Off ("OF"), Low (1), Medium (2), or High (3). Release the Speed button.
After 2 seconds, the Fan speed is set and the LED Display will show the relative humidity.
10. During normal operation, the LED Display will show the relative humidity of the space in
which you place your humidifier.
Automatic Shut-Off
When the Water Tank is empty, the humidifier will automatically turn off and the red Refill
Tank LED will turn on. The Refill Tank LED will turn off when the Tank is refilled and placed
back on the humidifier.
Timer
You can set your humidifier to run for pre-set periods of time.
1. To see the current Timer setting, press the Timer button once.
2. To change the Timer setting, press the Timer button and hold it for 3 seconds. The current
Timer setting will begin to flash.
3. Press the Timer button again to change the setting. The settings in hours are OF (Off), 2,
4, 8 and 10.
3. When the LED Display shows your desired run time, release the Timer Button. After 2 sec-
onds, the run time is set and the LED Display will show the relative humidity.
4. The humidifier will shut down automatically when the set time expires.
43002-01 05/30/2007
Features and Options
7
© 2007 Hunter Fan Co.