Descargar Imprimir esta página
Steren CCTV-400 Manual De Instrucciones
Steren CCTV-400 Manual De Instrucciones

Steren CCTV-400 Manual De Instrucciones

Extensor de vídeo con cable utp cat 5

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Before using your new Electronic insect killer, please read
Before using your new Composite video CAT5 extender, read
this instruction manual to prevent any damage. Put it away
the following recommendations.
IMPORTANT
Do not attempt to open the device, may cause malfunctions.
Warranty is void if you open the divice.
To clean the device use a sofy and dry cloth.
FEATURES
These video extender allows you to connect and send a base
band signal up to 328ft distance, using a Cat5 cable.
Easy to install.
Batteries are not required.
Increases up to 50% the cable length.
CONTROLS
1.- RJ-45 port.
2.- BNC connector.
1
2
CONNECTION AND INSTALATION
TRANSMITTER:
1 .- Connect the video cable with BNC connector from the CCTV
camera to the transmitter.
2 .- Use a CAT 5e cable or higher and connect it to transmitter.
RECEIVER:
1 .- Connect the CAT 5e cable from the transmitter to the receiver.
2 .- Connect a video cable with BNC connector from the monitor
or TV to the receiver.
Before using your new Electronic insect killer, please read
The maximum length of the cable network is 328ft
this instruction manual to prevent any damage. Put it away
TRANSMITTER
BNC VIDEO
CAT5e CABLE
RECEIVER
RJ-45 JACK PIN DEFINE
1 2 3 4 5 6 7 8
PAR
PIN
PAR 1
1--2
PAR 2
3--6
PAR 3
4--5
PAR 4
7--8
Before using your new Electronic insect killer, please read
Product design and specifications are subject to change
this instruction manual to prevent any damage. Put it away
without previous notice.
in a safe place for future references.
BNC VIDEO
BNC VIDEO
BNC VIDEO
PIN
COLOR
FUNCION
1
White/Orange
S2
2
Orange
S1
3
White/Green
Without function
4
Blue
A1
5
White/Blue
A2
6
Green
Without function
7
White/Brown
Video +
8
Brown
Video -

Publicidad

loading

Resumen de contenidos para Steren CCTV-400

  • Página 1 CONNECTION AND INSTALATION TRANSMITTER: 1 .- Connect the video cable with BNC connector from the CCTV camera to the transmitter. 2 .- Use a CAT 5e cable or higher and connect it to transmitter. RECEIVER: 1 .- Connect the CAT 5e cable from the transmitter to the receiver. 2 .- Connect a video cable with BNC connector from the monitor or TV to the receiver.
  • Página 2 Product: Composite video CAT5 extender Part number: CCTV-400 Brand: Steren WARRANTY This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from the date of purchase. CONDITIONS 1.- This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when warranty service is required.
  • Página 3 Electrónica Steren S.A. de C.V. 1.- Conecte el cable de red CAT 5e o superior del transmisor 2.- Electrónica Steren S.A de C.V. se compromete a reparar el producto hacia el receptor. en caso de estar defectuoso sin ningún cargo al consumidor. Los gastos 2.- Conecte el cable de vídeo con conector BNC del receptor a un...