Steren COM-820 Manual De Instrucciones página 79

Appendix B: Confi guring the PCs
In this section, we'll introduce how to install and confi gure the
TCP/IP correctly in Windows 95/98. First make sure your
Ethernet Adapter is working, refer to the adapter's manual if
needed.
1. Install TCP/IP component
1) On the Windows taskbar, click the Start button, point
to Settings, and then click Control Panel.
2) Double-click the Network icon, click on the
Confi guration tab in the appearing Network window.
3) Click on the Add button. Select Protocol, and then
click Add.
4) Under Manufacturers on Select Network Protocol
page, highlight Microsoft. Under Network Protocols,
highlight TCP/IP. Click OK. TCP/IP protocol will take
effect after reboot.
ENGLISH-79