Steren RM-310 Manual De Instrucciones página 13

2.2 Semi-manual programming
1. Manually turn on the component (TV, AUX, etc.).
2. Select the button of the device that you want to program.
3. Press and hold the SET button until the indicator on the button (TV, AUX, etc.) is active.
4. Aim the remote control directly to the device and press the power
key repeatedly until it turns off.
5. When the equipment is controlled via the remote control, press the SET key to finish and record the
code in memory.
If the equipment cannot be controlled after successfully programming sequences, perform the manual
programming.
3. MOUSE MODE
To use a RM-310 on a device (computer, internet TV, blu-ray, videogame
consoles, etc.) you must connect the receiver to a USB connector and select the
PC button on the remote control.
Use the following buttons to use the control on mouse.
1. Left click
2. Displacement: this button has two modes:
- Press and hold while moving the control to move the pointer.
- Press twice to move the pointer.
3. Right click
SET
INPUT
AUX STB
PC TV
5