Universal Forest Products SHADOWBOX Instrucciones De Ensamblado

T-Rail
T-Rail
(2) Rails
(2) Rails
6x6 Shadowbox Privacy Panel
Actual size: 68.5"h x 66.875"w
6x6 Shadowbox Privacy Panel
Actual size: 68.5"h x 66.875"w
6x6 Shadow Box.eps
6x6 Shadow Box.eps
Assembling the panel
• Find a hard, clean dry surface for panel assembly. You may want
to lay down a protective drop cloth on your work surface.
Each picket is notched; the top of the picket has a single notch,
the bottom of the picket has a double notch. Lay out six pickets
in the same direction with space in between as shown (fig. 1).
• Place one of the rails across the pickets at the bottom of the
panel assembly. Align the tabs of the rails with the notches in
the pickets. (fig. 2).
• Apply even pressure to the rail snapping the tabs into the
picket notches (fig. 3). You can use a non-marring rubber
mallet to more firmly join the rail to the pickets. Continue
until all the rail tabs are snapped into the picket notches.
• Repeat Step 3 to join the second rail to the pickets in the
middle of the panel assembly (fig. 4).
• Place the remaining five pickets on top of the two rails,
ensuring the pickets are facing in the same direction.
While applying even pressure on the pickets, snap each
onto the rails (fig. 5).
• Stand up the panel assembly. Insert the T-rail into channel
at the top of the panel assembly (fig. 6). Slide the T-rail all the
way over (fig. 7).
• The panel assembly is now complete. Please use the shadow-
box panel brackets (instructions included) to install panels.
6x6 SHADOWBOX PRIVACY PANEL
ASSEMBLY INSTRUCTIONS
(11) Pickets
(11) Pickets
Note: PicketLock
vides a glue- and fastener-free connection between the pick-
ets and rails. You may spray soapy water onto components to
help them slide more easily into their corresponding channels.
A non-marring rubber mallet may also be used to gently tap
components more firmly into place.
fig. 1
fig. 4
©2015 Universal Forest Products, Inc. All rights reserved.
68956 U.S. Hwy 131, White Pigeon, MI 49099 616.365.4201 7953_12/15
www.ufpi.com
Kit contents
• 3 - rails • 11 - pickets
Items needed
• Soapy water • Non-marring rubber mallet
• Wooden wedge • Drill with square bit
is a patent-pending technology that pro-
™
fig. 6
fig. 2 fig. 3
fig. 5
fig. 7