Publicidad
4020 PUSH SIDE (TOP JAMB) SINGLE RABBETTED FRAME
PERMITS 180° MAXIMUM OPENING
7
1/16
179 mm
5
1/16
129 mm
3
1/16
78 mm
4020 PUSH SIDE (TOP JAMB) 4020-18G
PERMITS 180° MAXIMUM OPENING
8
= 100°
203 mm
6
= 140°
152 mm
4
= 180°
102 mm
JAMB
LINE
1
1/16
3/8
27 mm
10 mm
12
3/4
324 mm
10
3/4
273 mm
8
3/4
222 mm
DOOR EDGE
Customer Service
Servicio al cliente
1-877-671-7011
= 100°
= 140°
6
= 180°
152 mm
2
1/2
64 mm
11/16
17 mm
12
= 100°
3/4
324 mm
10
3/4
= 140°
273 mm
8
3/4
= 180°
222 mm
4
1/8
105 mm
= 100°
= 140°
= 180°
Service à la clientèle
www.allegion.com/us
1
15/16
49 mm
LEFT HAND DOOR SHOWN,
RIGHT HAND DOOR OPPOSITE
4
1/8
105 mm
1
15/16
49 mm
LEFT HAND DOOR SHOWN,
RIGHT HAND DOOR OPPOSITE
Notes: 1. Locate closer & shoe from centerline of pivot or swing clear hinge pin if used.
2. Reinforcing per ANSI/SDI-100 recommended for hollow doors and frames.
3. With overhead stops, shoe must be lowered to clear holder.
4. For 180° opening, frame width cannot exceed 4 1/2 max. butt size 5". For reveals up
to 2 9/16 regular arm permits 180°, max. butt size 5". For reveals 2 9/16 to 4 13/16 max.
opening is 140°, regular, H-90 & F.L. arms.
5. Closer size: 12 1/4 x 3 1/2 x 2 1/4.
1
1/4
32 mm
Notes: 1. Locate drop plate & shoe from centerline of pivot or swing clear hinge pin if used.
2. Reinforcing per ANSI/SDI-100 recommended for hollow doors and frames.
3. With overhead stops, shoe must be lowered to clear holder.
4. For 180° opening, frame width cannot exceed 4 1/2 max. butt size 5". For reveals up
to 2 9/16 regular arm permits 180°, max. butt size 5". For reveals 2 9/16 to 4 13/16 max.
opening is 140°, regular, H-90 & F.L. arms.
5. Closer size: 12 1/4 x 3 1/2 x 2 1/4.
TOP OF
DOOR
2
1/2
64 mm
1 3/4
Min.
44 mm
For 180° opening, frame width cannot exceed 4 1/2 max.
butt size 5". For reveals up to 2 9/16 regular arm permits
180°, max. butt size 5". For reveals 2 9/16 to 4 13/16 max.
opening is 140°, regular, H-90 & F.L. arms.
© Allegion 2014
Printed in U.S.A.
28477 Rev. 01/14-k
Publicidad
