Installation - Klarstein MADONNA Manual De Instrucciones

EN
20

INSTALLATION

• The ceiling from which the unit is suspended must be able to support at least
40 kg of weight and must be at least 30 mm thick. Drill a 170 mm hole in the
ceiling. 2.
• Drill 12 holes in the ceiling as shown in Figure 2 and fix the suspension with
6*40 mm screws. Use 8 M4*10 bolts and M4 gasket nuts with gasket to attach
the iron angle to the suspension. After calculating the length of the iron angle
(see Fig. 1), use 16 M4*10 bolts and M4 gasket nuts to attach one more iron
angle to the iron angle. The angles must overlap by at least 10 cm!