Operation - Steren PAR-064 Manual De Instrucciones

Make a DMX installation connecting one end of the canon cable (not
included) to the "OUTPUT" jack of the first apparatus and connect the other
end to the "INPUT" jack of the next apparatus. Always connect an input to
an output.
7F00
SLAE

4.1.1 Operation

1.-Once the connections are made and the power cord is
plugged, use the UP and DOWN (down) button to select
one of the 20 operation modes.
2.-Use INC and DEC buttons to adjust the values of the
selected mode.
8
To synchronize the installation, you must
select an operation mode on the first lamp with
the UP and DOWN buttons (except for SLAE
or d001). Doing this will establish the lamp
as the MASTER lamp which will control the
others.
Set the other lamps to SLAVE (SLAE) mode
and they will all follow the same setting, so
they will all be synchronized to the same mode
that you have selected.