Airflow Direction Control - DIAL J1-72 Manual De Instrucciones

Operation instructions

Airflow direction control

Vertical airflow (and Horizontal airflow for units with four way
airflow) is automatically set in accordance with the operation
mode after turning the unit on.
Operation mode Direction of airflow
COOLING, DRY
*HEATING,
FAN ONLY
*Heating mode is only available for heat pump models.
Vertical airflow control (with the remote controller)
Swinging airflow
SWING" button once will cause the vertical airflow
Pressing "
louver to swing up and down automatically.
Desired direction airflow
Pressing the "
desired angle will cause the louvers to hold that position.
Horizontal airflow control (with the remote controller)
Swinging airflow
SWING" button once will cause the horizontal airflow
Pressing "
louver to swing left and right automatically.
Desired direction airflow
Pressing the "
desired angle will cause the louvers to hold that position.
NOTE: If the unit doesn't have automatic four way airflow functionality, you
can manually adjust the horizontal airflow louver.
Do not turn the vertical adjustment louvers manually, otherwise malfunction may occur. If that happens, turn off the
unit first and cut off the power supply, then restore power supply again.
It is better not to let the vertical adjustment louver tilt downward for a long time at COOLING or DRY mode to prevent
condensed water from dripping.
Airflow direction control
The direction of airflow can
also be adjusted by pressing
the "SWING" button of the
remote controller.
horizontal
downward
SWING" button again when the louvers swing to a
SWING" button again when the louvers swing to a
SWING
4
8
ON ON
OFF OFF
ON/OFF
MODE FAN
5
SWING SLEEP SUPER
SMART
IFEEL DIMMER
TIMER ON TIMER OFF CLOCK
8
SWING MUTE HEAT