Safety Warning - Hama 00049535 Manual De Instrucciones

L Operating Instruction Aadapter for plasma wall bracket, swivel arm
This adapter was specially developed for fl exible wall mounting of fl at panel displays.
This adapter can only be used with the following HAMA LCD/plasma TV wall brackets:
HAMA item no. 00049515 "Home Cinema" wall bracket for plasma/LCD, size "S"
HAMA item no. 00049516 "FIX" wall bracket for plasma/LCD, size "S"
HAMA item no. 00049517 "Home Cinema" wall bracket for plasma/LCD
HAMA item no. 00049518 "FIX" wall bracket for plasma/LCD
The adapter can also be used for the following LCD/plasma TV wall bracket:
EasyLine item no. 00016864 wall bracket for plasma/LCD
The adapter allows you to expand the wall brackets listed above. The adapter cannot be used alone. After
assembly, the adapter allows you to swivel an LCD/plasma TV by up to 180° on two joints. The maximum depth
can be varied between approx. 6 cm and 30 cm depending on the setting.
Using the adapter does not affect the maximum supported weight of the actual wall bracket. The maximum
supported weights are as follows
40 KG for HAMA item no. 00049515
40 KG for HAMA item no. 00049516
75 KG for HAMA item no. 00049517
75 KG for HAMA item no. 00049518
75 KG for EasyLine item no. 00016864

Safety warning:

For proper mounting please have this adapter fi tted by a qualifi ed technician! Please check that the assembly
set is complete before installing the adapter and ensure that none of the parts are faulty or damaged. Use this
adapter for the intended purpose and with the approved wall brackets only (see above for the list of approved
brackets). When installing the adapter, observe the assembly and safety instructions of the wall bracket in
particular.
Before installing the bracket, ensure that the wall on which the television is to be mounted is suitable for the
weight and please make sure that no electrical wires, water, gas or other pipelines are located around the
installation location.
The anchor wall should be made of solid wood or brick. If the wall on which the television is to be mounted is
made of other materials you should buy appropriate installation material from a specialised dealer.
Also observe the necessary safety clearance around the TV set (depends on the model). The adapter may not
be mounted at or above locations where persons are able to stand.
Once you have mounted the adapter, the wall bracket and the fl at screen, check that they are suffi ciently
secure and safe to use. You should repeat this check at regular intervals (at least every three months).
Hama GmbH & Co. KG does not accept warranty claims if the adapter is not installed properly or for resulting
damage.
5