Technical Data; Noise Information; Vibration Information - Ratio PRO XF 18V Manual De Instrucciones

TECHNICAL DATA

Type CGA18GD (CGA-designation of machinery, representative of Angle Grinder)
Voltage
No load speed
Disc size
Disc bore
Spindle thread
Machine weight
ABP218L4Z
ACG18LD3
Charger Protection class
The accessories of battery charger and battery pack illustrated or described are not included in delivery.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K & K 3.0dB(A)
PA WA
Wear ear protection.

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 60745:
surface grinding or abrasive
cutting off
The declared vibration total value may be used for comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Helping to minimize your vibration exposure risk.
L : 77dB(A)
pA
L : 88dB(A)
wA
Vibration emission value ah,
Uncertainty K = 1.5m/s²
4.0 Ah Li-ion
100-240V~50/60Hz, 78W
14.4-20V
= 4.381 m/s
2
AG
18V
8800/min
115mm
22.2mm
M14
1.83kg
, 3000 mA
/II
39