Ready to work
●Wear Safety Gear
Always wear proper protective gear such as: approved safety helmet,
elbow pads and knees, long sleeved shirt and pants, gloves, and lace up
shoes with rubber sloes.
●Check the Hardware
Wheels: Inspect the wheels.
Remote Controller: Check if the remote battery needs to be replaced.
How to charge the skateboard
●Use the original power adapter to charge.
●Skateboard: Connect the charger to the charging port. The battery is fully
charged when the indicator of charger turns from red to green after
generally 2 to 3 hours.
●Remote Controller: use the USB cable to charge.
The red lights turn off when the battery is fully charged.
Charging the battery
● The charging environment should be kept clean and dry.
● When charging, do not turn on the power to driving.
● During the process of charging, do not try to use it.
● Fully charge Skateboard every three months if it is left unused.
● This vehicle is not fitted for children, elders or physically deficient
people.
● Do not drive unless you are sober.
● Please drive on the flat and open ground.
● Do not drive on pits, sand, gravel, mud, rugged or ramp ground.
● Do not drive on slippery ground, such as snow, ice or wet ground.
Prevent slipping when driving.
● Do not drive in crowded places or narrow spaces.
● Keep a safe distance between you and other people and objects.
● Do not drive at night.
● The maximum load is 80 Kg and it is not allowed to people under 14
years old.
Safety and warning
●You must learn how to drive safely to avoid danger while driving.
●Do not drive in motor vehicle driveways and the sidewalks.
Remote controller key introduction
Speed stick
Speed Mode
1
2
Controller and Board
3
Power indicate light
Controller singnal
4
status indicate light
Direction buttons
5
The lights turn off when the battery is fully charged
Forwad
Controller charging
8
port
Controller power
7
switch
Code buttons
6
Brake
High Speed
Slow Speed