Set To The Desired Position; Mount The Mobile Holder - Nokia Holder Easy Mount HH-12 Manual Del Usuario

locking lever toward the top of the
mounting device (3), and pull the

Set to the desired position

Do not adjust the mounting device
while driving.
To set the top of the mounting device
to the desired position, loosen the two
screws in the middle of the mounting
device, turn the top to the desired
position, and tighten the screws (5).

Mount the mobile holder

To attach a compatible Nokia mobile
holder to the mounting plate, use the
screw supplied with the holder.
To use the CR-96 mobile holder,
remove the protection plate with the
Nokia text from the holder, attach the
holder to the mounting plate with the
supplied screw, and replace the
strap located on the edge of the
suction cup (4).
Ensure that the top of the device is
firmly locked into place.
To set the mounting plate at the top of
the mounting device to the desired
position, loosen the screw below the
plate, turn the plate to the desired
position, and tighten the screw (6).
protection plate (7). To insert your
mobile device into the holder, slide it
into the holder from the top (8). To
remove the device, push the catch at
the top of the holder (9), and pull the
device out (10).
When attaching a mobile holder,
ensure that the display of the mobile
ENGLISH