Installation Instructions; Before You Begin - Thermador EXTNSET4 Instrucciones De Instalación

Installation instructions

Before you begin

The EXTNSET4 adapter kit is for connections when wiring
Thermador blowers to products other than the Thermador
Professional Series hoods with the EXTNCB25W 25 ft.
extension cable.
IMPORTANT: Cutting off a connector to the appliance or
to the extension cable kit will void the warranty.
NOTE: Refer to the hood and the blower manufacturer's
installation instructions.
Parts included
• Adapter no. 1 – material no. 9001242198
• Pigtail harness no. 1 – material no. 8001090211
• Pigtail harness no. 2 – material no. 8001090212
• Wiring diagram
Adapter kit compatibilities
Adapter no. 1
9001242198
SVC. no. 00750108
Hood
VCI2xxDS VTI610W
VTI1010W
+
Hood
HPCNxxWS PHxxHWS
HPINxxWS VCINxxGWS
PHxxGWS
*Reference the blower wiring diagram for connections.
Page. 3
+ +
Blower
VTR630W
VTR1030W
Pigtail no. 1
8001090211
SVC. no. 10009121
+
+
25 ft.
extension Blower
cable
EXTNCB25W Other*
Pigtail no. 2
8001090212
SVC. no. 12025288
+
Hood 25 ft. extension cable Blower
Other* EXTNCB25W
HDD80050UC
HDD86050UC
UCVM30RS
UCVM36RS
UCVP36RS
*Reference the hood wiring diagram for connections.
Adapter installation
To connect the extension cable and adapter to the hood
1. Route the hood harness through the hood's knockout
hole. Secure with a ¾'' (19 mm) strain relief.
2. Follow the wiring diagram for complete instructions.
+ +
VTI610W
VTI1010W
VTR630W
VTR1030W