Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
READ THIS BEFORE YOU START...
Tools needed for installation:
PARTS supplied for installation:
Cable tie to secure drain hose to standpipe, inlet hose or laundry tub
Bolt hole covers
CABINET DIMENSIONS
9700/8700 series
A.
Height-Overall
B.
Width
C.
Depth-With Washer Door Open 90 50-7/8" (129.2)
Degrees
D.
Depth
A
B
Note:
The height of the washer from top to floor is 38" this includes the leveling leg screwed all the way in. The customer can
unscrew the leg out an additional 7\8" for a total overall height of 38 7\8".
Hose guide
INCH(CM)
38" (96.5)
27" (68.6)
30-3/4" (78.1)
C
D
• Multi wrench
• Utility knife
• Channel lock
• Level
Wrench
6700 series
A.
Height-Overall
B.
Width
C.
Depth-With Washer Door Open 90 49" (124.5)
Degrees
D.
Depth
A
2
ELECTRICAL
Refer to serial plate for specific
electrical requirements. For
more detailed information refer
to section on Electrical
Requirements.
WATER
Washer needs two standard
3/4 inch water supply faucets
with a pressure between
20–120 pounds per square inch.
For more detailed information
refer to section on Water
Requirements.
C
D
B
INCH(CM)
38" (96.5)
27" (68.6)
28" (71.0)
Publicidad
Tabla de contenido
