spot GEN4 Guia De Incio Rapido página 2

SPOT GEN4 QUICK START GUIDE
SPOT Gen4 requires an active SPOT Service Plan.
!
S.O.S. WILL NOT WORK WITHOUT ACTIVATION.
LOCATE THE SERIAL NUMBER (ESN) AND AUTHORIZATION CODE
a. These codes are located inside the battery compartment of your SPOT Gen4. You will need these codes
when setting up your account on FindMeSPOT.com/Activate.
SERIAL NUMBER (ESN)
AUTHORIZATION CODE
ACTIVATE & UPDATE FIRMWARE
a. Activate your new SPOT Gen4:
FindMeSPOT.com/Activate
•
NEW SPOT CUSTOMERS:
Select Begin Activation.
•
EXISTING SPOT CUSTOMERS:
Login using username & password.
For more information on how to use your new device, refer to the SPOT Gen4 User Guide
located at: FindMeSPOT.com/SPOTGen4UserGuide
b. Follow onscreen instructions to complete
activation.
c. Configure your profile via SPOT My Account.
d. Download the SPOT Updater:
FindMeSPOT.com/SPOTGen4Support
e. Follow onscreen instructions to update
firmware and sync.
LED/BUTTON TEST -
TEST BEFORE EVERY ADVENTURE
Device check: Insert fresh batteries* and then perform the LED/Button test.
With your SPOT Gen4 off, press & hold the Track
1
button followed by the Power button. Hold for
approximately 3 seconds.
2
Press the S.O.S. and Help buttons at the same time.
Press the Custom Message and Check In buttons at
3
the same time.
NOTE: Steps have to be performed within a few seconds of each other, or the test will timeout. You can
start over if the test is not completed.
TEST YOUR SPOT GEN4
RESTRICTED
VIEW
MAY NOT FUNCTION PROPERLY
a. Go outside where there is a clear view of the sky and no obstructions.
b. Power on.
c. Orient SPOT Gen4 so that the SPOT logo is facing up toward the sky.
d. Press and hold the button until the function light blinks green. To
ensure delivery, leave active for 20 minutes.
e. Verify receipt of your message in SPOT Mapping and by your friends
and family.
*Power options:
• 4 AAA Energizer Ultimate Lithium 8x batteries (L92)
®
• 4 AAA Energizer NiMH rechargeable batteries (NH12)
®
The HELP and S.O.S. LEDs should turn green.
All LEDs should turn red.
All LEDs should turn green.
CLEAR
VIEW
CORRECT