Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATIONS (Continued)
CHANNEL SETTING
[AUTO PRESET CHANNELS]
As the initial setting, this TV has memorized all channels, including the ones not available in your
area. This feature automatically puts only available channels into the memory.
1) Press [MENU]. Using [CH ▲/▼] select "CHANNEL SET", then press
[VOL ▲].
2) Using [CH ▲/▼] select "AUTO PRESET CH", then press [VOL ▲].
The tuner scans and memorizes all available channels in your area.
3) When the scanning is completed, the lowest memorized channel appears on the TV screen.
Notes:
The TV distinguishes between standard TV channels and cable (CATV) channels.
●
The TV may recognize TV channels as CATV channels if reception condition is poor. If this
●
happens, check the antenna connections and try steps 2) to 3) again when reception conditions
are better.
If there is no TV signal input, "NO TV SIGNALS" will appear on the
●
display after the completion of channel scanning.
[ADDING/DELETING CHANNELS]
You can add or delete channels manually.
1) Press [MENU]. Using [CH ▲/▼] select "CHANNEL SET", then press [VOL ▲].
2) Press [VOL ▲] to select "ADD/DELETE".
3) Use [CH ▲/▼] to select the channel you wish to put into memory or to
erase from memory.
Note:
The menu will disappear automatically after about 10 seconds.
●
4) Use [VOL ▲/▼] to add or delete the channel. The added channel number will appear in light
blue and deleted channel number will appear in light red.
MULTI-CHANNEL TELEVISION SOUND ( MTS )
You can set to receive TV programs in Stereo, Second Audio or Monaural sound as you prefer.
1) Press [MENU]. Using [CH ▲/▼] select "TV SOUND".
2) Use [VOL ▲/▼] to select [MAIN], [MONO] or [SAP]
(Second Audio Program).
The sound mode will be changed by pressing the button as following:
[MAIN]
[MONO]
3) Press [MENU] to exit the menu.
Menu
Selection
MAIN
MONO
Type of
broadcast
-None-
-None-
-None-
Regular
Stereo
STEREO
MONO
STEREO
broadcast
MAIN
MAIN
SAP
PICTURE ADJUSTMENT
You can adjust the TV's brightness, contrast, color, tint and sharpness as you prefer.
1) Press [MENU]. Press [VOL ▲] to select "PICTURE".
2) Press [CH ▲/▼] to select an item and press [VOL ▲/▼] to adjust setting.
[-]
[-]
[+]
[-]
[+]
GAME MODE
BRIGHT
OFF
ON
GAME MODE
Set to the most suitable position for video games.
[-] : OFF
[+] : ON
BRIGHT
Adjust until the darkest parts of the picture are as bright as you prefer.
[-] : decrease brightness
[+] : increase brightness
CONTRAST
Adjust to increase or decrease contrast.
[-] : decrease contrast
[+] : increase contrast
COLOR
Adjust to be brilliant or pale color.
[-] : be pale color
[+] : be brilliant color
TINT
Adjust to obtain natural skin tones.
[-] : add red
[+] : add green
SHARPNESS
Adjusts the detail of the picture.
[-] : make soft
[+] : make clear
Notes:
The display will disappear automatically after 10 seconds unless you press any buttons.
●
Magnetism from nearby appliances and speakers might affect the color of the TV picture. If
●
this happens, press [POWER] to turn off the TV and turn it on again after about 30 minutes.
[SAP]
Note:
If you select [SAP] when second audio is
●
SAP*
not available, the TV will receive normal
audio.
*Second Audio Program (SAP) :
SAP
Your program can also be received in a sec-
ond language or sometimes a radio station.
[+]
[-]
CONTRAST
[-]
[+]
TINT
COLOR
GAME MODE
This feature is helpful for playing video games. By pressing [GAME], you can set Game mode
(suitable picture setting for games) and TV selects automatically front A/V input.
1) To use video games;
Press [GAME].
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
ADD/DELETE
2) To cancel Game mode only;
AUTO PRESET CH
Press [MENU] and [VOL ▲] to select "PICTURE". Then Game mode will
automatically be canceled. (The setting menu will disappear after 10 sec-
onds.)
3) To watch another input (game, DVD player, camcoder etc.);
Press [INPUT SELECT] repeatedly.
NO TV SIGNALS
Notes:
If you press [GAME] when the TV is off, the TV turns on and will be in Game mode and
●
external input mode automatically.
If you adjust another picture control while in Game mode, this mode will automatically be can-
●
celed.
ADD/DELETE
AUTO PRESET CH
CLOSED CAPTION
You may view specially labeled (cc) TV programs, movies, news and prerecorded tapes, etc. with
either a dialogue caption or text display added to the program.
1) Press [MENU]. Use [CH ▲/▼] to point to "CAPTION".
2) Use [VOL ▲/▼] to select the mode you wish.
The CAPTION mode will be changed by pressing the button as following:
[OFF]
3) When done, press [MENU] to exit the menu.
[CAPTION MODE (C1, C2)]
PICTURE
CAPTION1 (C1)
●
CHANNEL SET
[ENG] / ESP / FRA
displays standard closed captions (what a character is saying).
V-CHIP SET UP
CAPTION2 (C2)
●
CAPTION [OFF]
displays foreign language closed captions (foreign language words showing what a character is
TV SOUND [MAIN]
saying).
There are three ways of displaying according to programs:
●
Paint-on mode : Displays input characters on the screen immediately.
Pop-on mode : Once characters are stored in memory, they are displayed all at once.
Roll-up mode : Displays the characters continuously by scrolling
[TEXT MODE (T1, T2)]
TEXT1 (T1) and TEXT2 (T2) display half-screen text by scrolling (such as
●
a channel guide, schedule or announcement).
Notes:
If closed captioning is not broadcasted, you cannot receive it and nothing is displayed.
●
When your TV receives a special effects playback signal (i.e., Search, Slow and Still) from a
●
VCR's video output channel (CH3 or CH4), the TV may not display the correct caption or text.
Captions and texts may not match the TV voice exactly.
●
Interference may cause the closed caption system not to function properly.
●
The caption or text characters will not be displayed while the menu display or functions display
●
is shown.
If a black box appears on the screen, this means that the TV is set to TEXT mode. To clear
●
screen, select CAPTION [C1], [C2] or [OFF].
[+]
[-]
[+]
SHARPNESS
OPTIONAL SETTINGS
LANGUAGE SELECTION
This affects the language of the TV's setup menus and on-screen display terms.
1) Press [MENU]. Use [CH ▲/▼] to select "[ENG]".
2) Use [VOL ▲/▼] to select "ENG(lish)", "ESP(añol)" or "FRA(nçais)".
3) Press [MENU] to exit the menu.
[C1]
[C2]
[T1]
(max. 4 lines).
GAME
Picture: GAME
Input: Front (VIDEO2)
VIDEO2
Picture: Customized
Input: Front (VIDEO2)
VIDEO1
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
[T2]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
Publicidad
Tabla de contenido
