Tabla de contenido
Publicidad
MCD4030
Preparation
Tools and Supplies
The following tools and supplies are needed to install the unit.
•
Torx type, Flat and Phillips screwdrivers
•
Wire cutters and strippers
•
Tools to remove existing radio (screwdriver, socket wrench set or other tools)
•
Electrical tape
•
Crimping tool
•
Volt meter/test light
•
Crimp connections
•
18 gauge wire for power connections
•
16-18 gauge speaker wire
Speaker Requirements: Only connect speakers rated in the load impedance of 4 ohms. Speakers
with a load impedance less than 4 ohms could damage the unit.
Choosing a Mounting Location
The following tips will help you determine the best location for mounting the unit:
•
Select a location that does not interfere with the normal functions of the driver and will not
cause injury to the driver or a passenger in the event of a sudden stop or other emergency.
•
Do not install the unit in a location that would subject it to high temperatures (such as in
direct sunlight or next to a heating unit), dust, dirt or excessive vibration.
•
Install the unit in a horizontal position if at all possible. If the installation angle exceeds 30
degrees from the horizontal, the unit may not function optimally.
•
If the installation requires the drilling of holes or other vehicle modifications, consult the
nearest dealer for assistance.
•
Before completing installation of the unit, connect the wiring temporarily to ensure that the
unit operates properly in the selected mounting location.
Preparación
Herramientas y Provisiones
Las siguientes herramientas y provisiones son necesarias para instalar el radio:
•
Llave torx, destornilladores plano y Phillips
•
Cúter y peladores de cables
•
Herramientas para remover la radio existente (destornillador, equipo de llave de casquillo y
otras herramientas)
•
Cinta aisladora
•
Enganchador
•
Voltímetro / luz de prueba
•
Conexiones para enganchar,
•
Cable de calibre 18 para conexiones eléctricas, cable de altoparlante de calibre 16w[ T JeeVgTDbre 1697.8( to hs[ T JeeV 97.ueri)-7.5oslonexi4(voz: Solame7.5(dentep)14.erl5(existe2105nexi)] T J16.3383 0 TD0d)-
ct t2 y Pro
Laiatu [ ( o) [ ( La)(c-6.76lelttdor
Tc-0.0069STw [ o lo1r7.ui
al905.8(Hdra3(t)-6• agujedio )75exis2(V526nexi) ] T J167143 6 TDo hs [ T ot [ ( o)modif6(0004d)51(6(e)0(l vehícul9)51(6(,p)14su
3
Publicidad
Tabla de contenido
