Back to Basics Chris Freytag Manual De Instrucciones página 4

1. Fill a standard ice cube tray or the supplied ice cups with water and place in the
freezer until frozen. Ice cubes work well in the Ice Shaver but may produce a
slightly coarser textured ice than the ice cup block.
2. Place the shaver bowl on top of the base, aligning the tabs with the slots and
gently press down until the shaver bowl locks into place. The shaver bowl
should not be removed after attaching.
3. Turn the blade adjustment knob on the side of the base – clockwise (right) for
finer and counterclockwise (left) for coarser shaved ice. Note: Do not change
the knob position while shaving ice.
4. When the ice cubes or ice cup blocks are frozen solid, remove from the tray or
cup and place in shaver bowl.
5. To use paper or silicone cone cups, insert the cup holder into the base opening,
or place a separate bowl or ice cup on the base to collect the shaved ice. Note:
Do not attach cup holder if using a bowl or ice cup.
6. Place the shaver motor on top of the ice, plug into an electrical outlet, and press
the power button while applying a steady, downward pressure. The motor will
start and ice shaving will begin. To stop shaving, remove hand from power
button.
7. Add your favorite Back to Basics
ice and enjoy.
8. Unplug from the power supply immediately after use.
•
A small amount of smoke and/or odor may occur upon use due to the
release of manufacturing oils – this is normal.
•
Some minor expansion/contraction sounds may occur during use – this is
normal.
1. Always unplug appliance before cleaning.
2. Hand wash in warm, soapy water. Rinse and dry thoroughly. CAUTION: Be
extremely careful of shaving blade in bowl as blade is very sharp. Note: Do not
wash parts in a dishwasher.
3. Clean exterior of the appliance with a damp, soft cloth and wipe dry. Note: Do
not immerse shaver motor in water or other liquid.
NEVER ATTEMPT TO SHARPEN SHAVING BLADE AS INJURY MAY OCCUR.
Super Snow Cones – Shave ice directly into Snow Cone Cups. Mound tops with
additional "Snow" if desired. Dispense your favorite Back to Basics
on top of the shaved ice. Combine different syrups to create your own unique
flavors. TIP: Use flavored ice cubes for unique snow cone tastes. Freeze fruit juice,
soda, flavored yogurt, or flavored milk into cubes. Shave into cups. If desired, use
®
Back to Basics
U Y
SING OUR
C Y
LEANING
C
OOL
syrups for added flavor.
E I
LECTRIC
®
syrup, soft drink, or fresh fruit to the shaved
E
OUR LECTRIC
& E T
ASY REATS
4
S
CE HAVER
I S
CE HAVER
®
syrup directly