Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The list below is a general guide to help you select the correct utensils.
C
o
o
k
w
a
e r
Heat-Resistant Glass
N
o
n
Heat-Resistant Glass
Heat-Resistant Ceramics
Microwave-Safe Plastic Dish
M
t e
l a
T
a r
y
M
t e
l a
R
a
k c
Aluminum Foil & Foil Containers
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Do not to use this furnace when this one is dirty, or in the presence of condensate on
the walls. Wipe and dry it before using it.
• Do not make function the oven if the plate does turn out of glass or without this plate.
• It is dangerous for whoever other that a person trained to carry out a maintenance action
or a repair which requires the withdrawal of a lid protecting from the exposure to energy
from the microwaves.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
•
agent or similarly qualified persons in order to avoid a hazard.
cannot be applied when back side has been opened.
IN THE EVENT OF MALFUNCTION
If the oven fails to operate :
- Check to ensure that the oven is plugged in securely. If it is not, remove the plug from
the outlet, wait 10 seconds and plug it in again securely.
- Check for a blown circuit fuse or a tripped main circuit breaker. If these seem to be
operating properly, test the outlet with another appliance.
- Check to ensure that the control panel is programmed correctly and the timer is set.
- Check to ensure that the door is securely closed engaging the door safety lock system.
Otherwise, the microwave energy will not flow into the oven.
-
In the event of a problem, contact your supplier or an approved After Sales
Service.
MAINTENANCE
• Disconnect the appliance from the power supply before carry out any form of
maintenance operation.
• Stainless steel parts : Wipe with a sponge. Usable cleaning products: methylated spirits,
degreasers, any stainless steel cleaning product. Never use substances containing
chlorine (bleach, etc.)
• Control button : Clean carefully using a sponge and soapy water only.
Do not use a brush, scoured sponge or abrasive rag.
• It is recommended to clean the furnace regularly and to remove any food deposit.
• If the apparatus is not maintained in a good state of cleanliness, its surface could be
degraded and affect in an inexorable way the lifespan of the apparatus and lead to a
dangerous situation.
• To keep the cavity interns always clean furnace and dries, by regularly cleaning it with a
soft rag. Not to use abrasive elements because you are likely to stripe or to damage
painting.
• The splashes on the interior face of the door, as on the joints of door and the
neighbouring parts must be cleaned daily with soapy warm water.
• In the event of deterioration of the joints of door or neighbouring parts, the
furnace will not have to function until its repairing by a qualified technician of the
After-sales service.
• Do never put water in the oven or all other liquid suceptible to damage in
particular the glass plate drive engine.
The oven outside part is made in metal. Clean it with a humidified soapy wipe. Rinse
and dry it with a soft wipe.
Do not put water in the air outlets, located on the top, the sides or the back of the
apparatus.
SERVICE
- Refer to an After Sales Service for all servicing operations.
M
c i
o r
w
a
v
e
C
o
o
k
w
a
e r
C
o
o
k
n i
g
Yes
Recycled materials
N
o
P
o
y l
e
h t
y
e l
Yes
Ploypropylene
Yes
Polycarbonate
N
o
P
E
T
N
o
P
o
c r
e
a l
n i
No
Cling Film and cellophane
ENGLISH
M
c i
o r
C
o
o
k
No
n
e
N
o
Yes
No
N
o
Y
e
Yes
The warranty
w
a
v
e
n i
g
s
- 9 -
Publicidad
Tabla de contenido
